Drilling

Location:Home > Products > Drilling

MSLT-1 (MS-1) Water-temperature and Flow-display Alarm

MSLT-1 (MS-1) Water-temperature and Flow-display Alarm

           Jingzhou Mind Science and Technology Co.,Ltd.

 

1. Overview
    MSLT-1(MS-1) Water-temperature and flow-display alarm (or MS-1 water temperature and pressure alarm) is an intelligent device which is used to detect the cycle water temperature of workover rig and drilling using water, to display flow or water pressure detection, and to alarm when out-of-limit happens. Water temperature and flow (or water pressure) directly shows the efficiency of water circulating cooling system. When water temperature increases, the efficiency of water circulating cooling system reduces; when flow is too small (or water pressure becomes smaller and disappear),water cycle will break down, and then water circulating cooling system will lose its cooling effect. This device is convenient for users to set alarm index, and realizes monitor in digital; it also has automatic alarm function.

 

2. Technical Parameter and Precision

Pressure test range 0.00Mpa~1.00Mpa Adapt to MSLT-1
Temperature test range -10~100 Adapt to all
Display range Pressure display: four LCD figures display 0.00Mpa~1.00Mpa Adapt to MSLT-1
four LCD figures display 1111 (normal display) 0000 (surpass lower limit) Adapt to MSLT-1
Temperature display: four LCD figures display 0℃~100℃ Adapt to all
Alarm conditions Pressure alarm condition: alarm when detected pressure value exceeds set value Adapt to MSLT-1
Temperature alarm condition: alarm when detected temperature value is more than set value Adapt to all
Flow alarm condition: alarm when detected flow value is less than set value Adapt to MSLT-1
Alarm loudness More than 80dB  
Noise-proof and anti-interference ability 1000Vpρ-p pulse width 1μs, frequency 30-100Hz  
Alarm response time ≤1S  
Power supply voltage DC 24V 50W  
Working temperature -30~65  


 

收缩
  • QQ咨询

  • 在线客服
  • 在线客服
  • 在线客服
  • 在线客服
  • 电话咨询

  • 0716-8217736